We retain improving upon and perfecting our items and repair. At the same time, we perform actively to do research and progress for High Quality for Awich Residual Current Circuit Breaker Electric Leakage Overcurrent Protection RCBO RCCB, We’ve been hunting forward to forming effective business marriage with new clients from the near upcoming!
We retain improving upon and perfecting our items and repair. At the same time, we perform actively to do research and progress for Breaker and RCCB, We always insist on the management tenet of “Quality is First, Technology is Basis, Honesty and Innovation”.We are able to develop new products continuously to a higher level to satisfy different needs of customers.
The items is in comply with standard of IEC61008-1,applying to the circuit of AC 50/60Hz, 230V single phase, 400V three phases or below it for industrial and mining enterprise, trade building, commerce and family. It is mainly used for preventing electric fire and personal casual accident caused by personal electric shock or leakage of electrified wire net, this is a current operated, fast leakage protector of pure electromagnetic type, which can break off fault circuit rapidly in order to avoid occurrence of accident.
PID-125 can be used to cut off the fault circuit on the occasion of shock hazard or earth leakage of trunk line, It conforms to IEC61008.We retain improving upon and perfecting our items and repair. At the same time, we perform actively to do research and progress for High Quality for Awich Residual Current Circuit Breaker Electric Leakage Overcurrent Protection RCBO RCCB, We’ve been hunting forward to forming effective business marriage with new clients from the near upcoming!
High Quality for Breaker and RCCB, We always insist on the management tenet of “Quality is First, Technology is Basis, Honesty and Innovation”.We are able to develop new products continuously to a higher level to satisfy different needs of customers.
The item is precise in structure, less elements, without auxiliary power and high working reliability. The function of the switch won’t be influenced by ambient temperature and lightning. The mutual inductor of the item is used to test vector differential value of passing current, and produces a relevant output power and add it to the tripper in secondary winding, if the current of vector differential value of protected circuit of personal electric shock is up to or over leakage operating current, the tripper will act and cut off so that the item will take effect of protection.
Independent of line voltage: | Yes |
Dependent of line voltage: | No |
Rated voltage Ue:(V) | 230V or240V(1P+N):400V or 415V(3P+N) |
Rated current in:(A) | 10A;16A;25A;20A;32A;40A;50A;63A;80A;100A;125A |
Rated frequency:(Hz) | 50/60Hz |
Rated residual operating current In:(A) | 30mA;100mA;300mA |
Type: | AC type and A type |
Temporisation: | Without time-delay |
Nature of supply: | ~ |
Total number of poles: | 1P+N and 3P+N(neutral on left |
Rated insulation voitage Ui:(V) | 415V |
Rated impulse withstandvoltageUimp:(V) | 4000V |
Utilisation rangetemperature:(°C) | -5°℃ to +40℃ |
Rated making and breaking capacityIm:(A) | 10In for 63A:80A:100A:125A500A for 10A:16A:25A:20A:32A40A:50A |
Rated residual making and breaking capacity Im:(A) | Same as Im |
Rated conditional short-circuit current Inc:(A) | 6000A |
Rated conditional residual short-circuit current Ic:(A) | Same as Im |
Short-circuit protection devices SCPDs used: | Silver wire |
Grid distance(short-circuit tests): | 50mm |
Protection against external influences: | Enclosed |
Protection degree: | IP20 |
Material group: | llla |
Method of mounting: | On rail |
Method of electrical connection | |
not associated with the mechanical-mounting | Yes |
associated with the mechanical-mounting | No |
Type of terminals | Pillar terminal |
Nominal diameter of thread:(mm) | 5.9mm |
Operating means | Lever |
Installation
Standard | IEC/EN 61008 | ||||||||
Installation | Terminal connection type | Cable/ U-type busbar/ Pin-type busbar | |||||||
Terminal size top for cable | mm² | 35 | |||||||
AWG | 18-3 | ||||||||
Terminal size top for busbar | mm² | 35 | |||||||
AWG | 18-3 | ||||||||
Tightening torque | N*m | 2.5 | |||||||
In-Ibs | 22 | ||||||||
Mounting | On DIN rail EN 60715 (35mm) by means of fast clip device | ||||||||
Connection | From top and bottom |
The item is precise in structure, less elements, without auxiliary power and high working reliability. The function of the switch won’t be influenced by ambient temperature and lightning. The mutual inductor of the item is used to test vector differential value of passing current, and produces a relevant output power and add it to the tripper in secondary winding, if the current of vector differential value of protected circuit of personal electric shock is up to or over leakage operating current, the tripper will act and cut off so that the item will take effect of protection.
Independent of line voltage: | Yes |
Dependent of line voltage: | No |
Rated voltage Ue:(V) | 230V or240V(1P+N):400V or 415V(3P+N) |
Rated current in:(A) | 10A;16A;25A;20A;32A;40A;50A;63A;80A;100A;125A |
Rated frequency:(Hz) | 50/60Hz |
Rated residual operating current In:(A) | 30mA;100mA;300mA |
Type: | AC type and A type |
Temporisation: | Without time-delay |
Nature of supply: | ~ |
Total number of poles: | 1P+N and 3P+N(neutral on left |
Rated insulation voitage Ui:(V) | 415V |
Rated impulse withstandvoltageUimp:(V) | 4000V |
Utilisation rangetemperature:(°C) | -5°℃ to +40℃ |
Rated making and breaking capacityIm:(A) | 10In for 63A:80A:100A:125A500A for 10A:16A:25A:20A:32A40A:50A |
Rated residual making and breaking capacity Im:(A) | Same as Im |
Rated conditional short-circuit current Inc:(A) | 6000A |
Rated conditional residual short-circuit current Ic:(A) | Same as Im |
Short-circuit protection devices SCPDs used: | Silver wire |
Grid distance(short-circuit tests): | 50mm |
Protection against external influences: | Enclosed |
Protection degree: | IP20 |
Material group: | llla |
Method of mounting: | On rail |
Method of electrical connection | |
not associated with the mechanical-mounting | Yes |
associated with the mechanical-mounting | No |
Type of terminals | Pillar terminal |
Nominal diameter of thread:(mm) | 5.9mm |
Operating means | Lever |
Installation
Standard | IEC/EN 61008 | ||||||||
Installation | Terminal connection type | Cable/ U-type busbar/ Pin-type busbar | |||||||
Terminal size top for cable | mm² | 35 | |||||||
AWG | 18-3 | ||||||||
Terminal size top for busbar | mm² | 35 | |||||||
AWG | 18-3 | ||||||||
Tightening torque | N*m | 2.5 | |||||||
In-Ibs | 22 | ||||||||
Mounting | On DIN rail EN 60715 (35mm) by means of fast clip device | ||||||||
Connection | From top and bottom |