LANGUAGE
MCB MCCB ACB Contactor Relay RDB5-63 RDM5 RDW5 RDC5 RDR5
Hot New Products Push Button Latching Mini 12V 20 AMP Featured Image

Hot New Products Push Button Latching Mini 12V 20 AMP

RDA1 series pushbutton switch,rated insulation voltage 690V,is applicable for telecontrolling electronmagnetic starter,contact,relay and other circuit of AC50Hz or 60Hz,AC voltage 380V ane below,DC voltage 220V and below.And the lamp pushbutton also can be used as single indication.

This production conforms to the standard of GB14048.5,IEC60947–5-1


Download as PDF
  • Hot New Products Push Button Latching Mini 12V 20 AMP

Product Detail

Application

Parameters

Samples & Structures

Dimensions

Usually customer-oriented, and it’s our ultimate focus on to be not only by far the most reliable, trustable and honest provider, but also the partner for our customers for Hot New Products Push Button Latching Mini 12V 20 AMP, We will wholeheartedly welcome all purchasers within the industry each at your house and abroad to cooperate hand in hand, and develop a vibrant upcoming with each other.
Usually customer-oriented, and it’s our ultimate focus on to be not only by far the most reliable, trustable and honest provider, but also the partner for our customers for China Push Button Latching Mini and Latching Push Button Switch 12V DC, Welcome any of your inquiries and concerns for our products. We look forward to establishing a long-term business relationship with you in the near future. Contact us today. We are the first business partner for you!

Product Introduction

RDB5-63 miniature circuit breaker is applicable to a circuit of AC50/60Hz, 230V (single phase), 400V(2,3, 4 phases), for overload and short circuit protection.Rated current up to 63A. It also can be used as a switch for an infrequent conversion line. It is mainly used in domestic installation, as well as in commercial and industrial electrical distribution systems. It conforms with the standard of IEC/EN60898-1.

Features

1. Process guaranteed performance

2. Small volume, large capacity

3. Super-strong wiring capacity

4. Good insulation between phases

5. Super-strong conductivity

6. Low temperature rise and power consumption

RDB5-63-C16-1P-2_new1 (1)Usually customer-oriented, and it’s our ultimate focus on to be not only by far the most reliable, trustable and honest provider, but also the partner for our customers for Hot New Products Push Button Latching Mini 12V 20 AMP, We will wholeheartedly welcome all purchasers within the industry each at your house and abroad to cooperate hand in hand, and develop a vibrant upcoming with each other.
Hot New Products China Push Button Latching Mini and Latching Push Button Switch 12V DC, Welcome any of your inquiries and concerns for our products. We look forward to establishing a long-term business relationship with you in the near future. Contact us today. We are the first business partner for you!

In the electric automatic control circuit, it is used to manually send control signals to control contactors, relays, electromagnetic starters, etc. Generally, the main circuit is not directly operated, but can also be used in the interconnection circuit. In actual use, in order to prevent misoperation, buttons are usually marked or painted with different colors, including red, yellow, blue, white, black, green, etc. Generally, red indicates operation under “stop” or “dangerous” conditions; Green means “ON” or “ON”. The emergency stop button must be red mushroom head button.

Main Technical data

Using type Rated current(A) Conventional thermal current(A) Rated insulation voltage(V) Protective class IP  Mechanical life
24V 48V 110V 220V 380V flush button rotation button key switch emergency stop pushbutton
AC-15 —— —— 6 3 1.9 10 690 IP65 2 million 0.5 million 50 thousand 50 thousand
DC-13 3 1.5 1.1 0.55 ——

 

Model No.

8

Normal working condition and installation condition

3.1 Altitude: lower than 2000m.
3.2 Ambient temperature: no higher than +40°C,and no lower than -5°C, and day average temperature shall no more than +35°C.
3.3 Humidity: Relative humidity shall not excced 50% at the Max temperature 40°C, and higher humidity could be accepted at lower temperature. The condensation must be taken care which is caused by temperature change.
3.4 Pollution class: III type
3.5 Installation level: II type
3.6 Install location should have no corrosion gas and onductive dust.
3.7 Pushbutton should be insall at round hole of control plate. The round hole can have square keyway which has upward position. The control plate thickness is 1 to 6 mm. If necessary, gasket could be used.

Code Name Code Name
BN flush button Y key switch
GN projecting button F Antifouling button
BND illuminated flush button X short-handle selector button
GND illuminated projecting button R button with mark head
M mushroom-headed button CX long-handle selectorbutton
MD illuminated mushroom-headed button XD short-handle selector button with lamp
TZ emergency stop button CXD long-handle selector button with lamp
H protective button A Two-headed button
Code r g y b w k
Color red green yellow blue white black
Code f fu ffu
Color left self-reset right self-reset left and right self-reset

 

Appearance and mounting dimensions

gap between mounting hole dimension and many pushbutton install, see diagra.

9

 

Notice

Please note the model no., specification and quantity in the order.

In the electric automatic control circuit, it is used to manually send control signals to control contactors, relays, electromagnetic starters, etc. Generally, the main circuit is not directly operated, but can also be used in the interconnection circuit. In actual use, in order to prevent misoperation, buttons are usually marked or painted with different colors, including red, yellow, blue, white, black, green, etc. Generally, red indicates operation under “stop” or “dangerous” conditions; Green means “ON” or “ON”. The emergency stop button must be red mushroom head button.

Main Technical data

Using type Rated current(A) Conventional thermal current(A) Rated insulation voltage(V) Protective class IP  Mechanical life
24V 48V 110V 220V 380V flush button rotation button key switch emergency stop pushbutton
AC-15 —— —— 6 3 1.9 10 690 IP65 2 million 0.5 million 50 thousand 50 thousand
DC-13 3 1.5 1.1 0.55 ——

 

Model No.

8

Normal working condition and installation condition

3.1 Altitude: lower than 2000m.
3.2 Ambient temperature: no higher than +40°C,and no lower than -5°C, and day average temperature shall no more than +35°C.
3.3 Humidity: Relative humidity shall not excced 50% at the Max temperature 40°C, and higher humidity could be accepted at lower temperature. The condensation must be taken care which is caused by temperature change.
3.4 Pollution class: III type
3.5 Installation level: II type
3.6 Install location should have no corrosion gas and onductive dust.
3.7 Pushbutton should be insall at round hole of control plate. The round hole can have square keyway which has upward position. The control plate thickness is 1 to 6 mm. If necessary, gasket could be used.

Code Name Code Name
BN flush button Y key switch
GN projecting button F Antifouling button
BND illuminated flush button X short-handle selector button
GND illuminated projecting button R button with mark head
M mushroom-headed button CX long-handle selectorbutton
MD illuminated mushroom-headed button XD short-handle selector button with lamp
TZ emergency stop button CXD long-handle selector button with lamp
H protective button A Two-headed button
Code r g y b w k
Color red green yellow blue white black
Code f fu ffu
Color left self-reset right self-reset left and right self-reset

 

Appearance and mounting dimensions

gap between mounting hole dimension and many pushbutton install, see diagra.

9

 

Notice

Please note the model no., specification and quantity in the order.

    • Products categories

    Write your message here and send it to us
    Hit enter to search or ESC to close