OEM/ODM Manufacturer Single Push Button Switch with Self Lock or Non-Lock Functions

That has a sound business credit history, outstanding after-sales service and modern producing facilities, we have earned an superb popularity amid our buyers across the planet for OEM/ODM Manufacturer Single Push Button Switch with Self Lock or Non-Lock Functions, We’ve been sincerely seeking ahead to cooperate with shoppers everywhere in the earth. We consider we are able to satisfy along with you. We also warmly welcome buyers to visit our manufacturing facility and purchase our products.
That has a sound business credit history, outstanding after-sales service and modern producing facilities, we have earned an superb popularity amid our buyers across the planet for Push Button and Single Button, With the highest standards of product quality and service, our products and solutions have been exported to more than 25 countries like the USA, CANADA, GERMANY, FRANCE, UAE, Malaysia and so on.We’ve been very happy to serve customers from all over the world!

Product Introduction

RDA1 series pushbutton switch,rated insulation voltage 690V,is applicable for telecontrolling electronmagnetic starter,contact,relay and other circuit of AC50Hz or 60Hz,AC voltage 380V ane below,DC voltage 220V and below.And the lamp pushbutton also can be used as single indication.

This production conforms to the standard of GB14048.5,IEC60947–5-1

Features

1. Convenient operation

2. Convenient installation

3. Can be distinguished by color

That has a sound business credit history, outstanding after-sales service and modern producing facilities, we have earned an superb popularity amid our buyers across the planet for OEM/ODM Manufacturer Single Push Button Switch with Self Lock or Non-Lock Functions, We’ve been sincerely seeking ahead to cooperate with shoppers everywhere in the earth. We consider we are able to satisfy along with you. We also warmly welcome buyers to visit our manufacturing facility and purchase our products.
OEM/ODM Manufacturer Push Button and Single Button, With the highest standards of product quality and service, our products and solutions have been exported to more than 25 countries like the USA, CANADA, GERMANY, FRANCE, UAE, Malaysia and so on.We’ve been very happy to serve customers from all over the world!

In the electric automatic control circuit, it is used to manually send control signals to control contactors, relays, electromagnetic starters, etc. Generally, the main circuit is not directly operated, but can also be used in the interconnection circuit. In actual use, in order to prevent misoperation, buttons are usually marked or painted with different colors, including red, yellow, blue, white, black, green, etc. Generally, red indicates operation under “stop” or “dangerous” conditions; Green means “ON” or “ON”. The emergency stop button must be red mushroom head button.

Main Technical data

Model No.

Normal working condition and installation condition

3.1 Altitude: lower than 2000m.
3.2 Ambient temperature: no higher than +40°C,and no lower than -5°C, and day average temperature shall no more than +35°C.
3.3 Humidity: Relative humidity shall not excced 50% at the Max temperature 40°C, and higher humidity could be accepted at lower temperature. The condensation must be taken care which is caused by temperature change.
3.4 Pollution class: III type
3.5 Installation level: II type
3.6 Install location should have no corrosion gas and onductive dust.
3.7 Pushbutton should be insall at round hole of control plate. The round hole can have square keyway which has upward position. The control plate thickness is 1 to 6 mm. If necessary, gasket could be used.

Appearance and mounting dimensions

gap between mounting hole dimension and many pushbutton install, see diagra.

Notice

Please note the model no., specification and quantity in the order.

In the electric automatic control circuit, it is used to manually send control signals to control contactors, relays, electromagnetic starters, etc. Generally, the main circuit is not directly operated, but can also be used in the interconnection circuit. In actual use, in order to prevent misoperation, buttons are usually marked or painted with different colors, including red, yellow, blue, white, black, green, etc. Generally, red indicates operation under “stop” or “dangerous” conditions; Green means “ON” or “ON”. The emergency stop button must be red mushroom head button.

Main Technical data

Model No.

Normal working condition and installation condition

3.1 Altitude: lower than 2000m.
3.2 Ambient temperature: no higher than +40°C,and no lower than -5°C, and day average temperature shall no more than +35°C.
3.3 Humidity: Relative humidity shall not excced 50% at the Max temperature 40°C, and higher humidity could be accepted at lower temperature. The condensation must be taken care which is caused by temperature change.
3.4 Pollution class: III type
3.5 Installation level: II type
3.6 Install location should have no corrosion gas and onductive dust.
3.7 Pushbutton should be insall at round hole of control plate. The round hole can have square keyway which has upward position. The control plate thickness is 1 to 6 mm. If necessary, gasket could be used.

Appearance and mounting dimensions

gap between mounting hole dimension and many pushbutton install, see diagra.

Notice

Please note the model no., specification and quantity in the order.