OEM Factory for High-Quality Illuminated Push Button with Enhanced Custom Tactile Solutions

Dependable good quality and very good credit score standing are our principles, which will help us at a top-ranking position. Adhering towards the tenet of “quality initial, shopper supreme” for OEM Factory for High-Quality Illuminated Push Button with Enhanced Custom Tactile Solutions, Our hugely specialized process eliminates the component failure and offers our shoppers unvarying high-quality, allowing us to control cost, plan capacity and maintain consistent on time delivery.
Dependable good quality and very good credit score standing are our principles, which will help us at a top-ranking position. Adhering towards the tenet of “quality initial, shopper supreme” for High-Quality Push Button and Illuminated Push Button, We are looking forward to cooperating closely with you to our mutual benefits and top development. We guaranteed quality, if customers were not satisfied with the products’ quality, you can return within 7days with their original states.

Product Introduction

RDA1 series pushbutton switch,rated insulation voltage 690V,is applicable for telecontrolling electronmagnetic starter,contact,relay and other circuit of AC50Hz or 60Hz,AC voltage 380V ane below,DC voltage 220V and below.And the lamp pushbutton also can be used as single indication.

This production conforms to the standard of GB14048.5,IEC60947–5-1

Features

1. Convenient operation

2. Convenient installation

3. Can be distinguished by color

Dependable good quality and very good credit score standing are our principles, which will help us at a top-ranking position. Adhering towards the tenet of “quality initial, shopper supreme” for OEM Factory for High-Quality Illuminated Push Button with Enhanced Custom Tactile Solutions, Our hugely specialized process eliminates the component failure and offers our shoppers unvarying high-quality, allowing us to control cost, plan capacity and maintain consistent on time delivery.
OEM Factory for High-Quality Push Button and Illuminated Push Button, We are looking forward to cooperating closely with you to our mutual benefits and top development. We guaranteed quality, if customers were not satisfied with the products’ quality, you can return within 7days with their original states.

In the electric automatic control circuit, it is used to manually send control signals to control contactors, relays, electromagnetic starters, etc. Generally, the main circuit is not directly operated, but can also be used in the interconnection circuit. In actual use, in order to prevent misoperation, buttons are usually marked or painted with different colors, including red, yellow, blue, white, black, green, etc. Generally, red indicates operation under “stop” or “dangerous” conditions; Green means “ON” or “ON”. The emergency stop button must be red mushroom head button.

Main Technical data

Model No.

Normal working condition and installation condition

3.1 Altitude: lower than 2000m.
3.2 Ambient temperature: no higher than +40°C,and no lower than -5°C, and day average temperature shall no more than +35°C.
3.3 Humidity: Relative humidity shall not excced 50% at the Max temperature 40°C, and higher humidity could be accepted at lower temperature. The condensation must be taken care which is caused by temperature change.
3.4 Pollution class: III type
3.5 Installation level: II type
3.6 Install location should have no corrosion gas and onductive dust.
3.7 Pushbutton should be insall at round hole of control plate. The round hole can have square keyway which has upward position. The control plate thickness is 1 to 6 mm. If necessary, gasket could be used.

Appearance and mounting dimensions

gap between mounting hole dimension and many pushbutton install, see diagra.

Notice

Please note the model no., specification and quantity in the order.

In the electric automatic control circuit, it is used to manually send control signals to control contactors, relays, electromagnetic starters, etc. Generally, the main circuit is not directly operated, but can also be used in the interconnection circuit. In actual use, in order to prevent misoperation, buttons are usually marked or painted with different colors, including red, yellow, blue, white, black, green, etc. Generally, red indicates operation under “stop” or “dangerous” conditions; Green means “ON” or “ON”. The emergency stop button must be red mushroom head button.

Main Technical data

Model No.

Normal working condition and installation condition

3.1 Altitude: lower than 2000m.
3.2 Ambient temperature: no higher than +40°C,and no lower than -5°C, and day average temperature shall no more than +35°C.
3.3 Humidity: Relative humidity shall not excced 50% at the Max temperature 40°C, and higher humidity could be accepted at lower temperature. The condensation must be taken care which is caused by temperature change.
3.4 Pollution class: III type
3.5 Installation level: II type
3.6 Install location should have no corrosion gas and onductive dust.
3.7 Pushbutton should be insall at round hole of control plate. The round hole can have square keyway which has upward position. The control plate thickness is 1 to 6 mm. If necessary, gasket could be used.

Appearance and mounting dimensions

gap between mounting hole dimension and many pushbutton install, see diagra.

Notice

Please note the model no., specification and quantity in the order.