ODM Supplier IP67 Waterproof Tact Switch Momentary 6X6 4 Pin DIP Micro 12V Tactile Push Button

We are committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for ODM Supplier IP67 Waterproof Tact Switch Momentary 6X6 4 Pin DIP Micro 12V Tactile Push Button, First company, we understand each other. Further more company, the trust is getting there. Our enterprise normally at your provider anytime.
We are committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for Mini Push Button Switch 6*6 and Micro Press Button 6X6, Our solutions are widely recognized and trusted by users and can meet continuously developing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!

Product Introduction

RDA1 series pushbutton switch,rated insulation voltage 690V,is applicable for telecontrolling electronmagnetic starter,contact,relay and other circuit of AC50Hz or 60Hz,AC voltage 380V ane below,DC voltage 220V and below.And the lamp pushbutton also can be used as single indication.

This production conforms to the standard of GB14048.5,IEC60947–5-1

Features

1. Convenient operation

2. Convenient installation

3. Can be distinguished by color

We are committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for ODM Supplier IP67 Waterproof Tact Switch Momentary 6X6 4 Pin DIP Micro 12V Tactile Push Button, First company, we understand each other. Further more company, the trust is getting there. Our enterprise normally at your provider anytime.
ODM Supplier Mini Push Button Switch 6*6 and Micro Press Button 6X6, Our solutions are widely recognized and trusted by users and can meet continuously developing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!

In the electric automatic control circuit, it is used to manually send control signals to control contactors, relays, electromagnetic starters, etc. Generally, the main circuit is not directly operated, but can also be used in the interconnection circuit. In actual use, in order to prevent misoperation, buttons are usually marked or painted with different colors, including red, yellow, blue, white, black, green, etc. Generally, red indicates operation under “stop” or “dangerous” conditions; Green means “ON” or “ON”. The emergency stop button must be red mushroom head button.

Main Technical data

Model No.

Normal working condition and installation condition

3.1 Altitude: lower than 2000m.
3.2 Ambient temperature: no higher than +40°C,and no lower than -5°C, and day average temperature shall no more than +35°C.
3.3 Humidity: Relative humidity shall not excced 50% at the Max temperature 40°C, and higher humidity could be accepted at lower temperature. The condensation must be taken care which is caused by temperature change.
3.4 Pollution class: III type
3.5 Installation level: II type
3.6 Install location should have no corrosion gas and onductive dust.
3.7 Pushbutton should be insall at round hole of control plate. The round hole can have square keyway which has upward position. The control plate thickness is 1 to 6 mm. If necessary, gasket could be used.

Appearance and mounting dimensions

gap between mounting hole dimension and many pushbutton install, see diagra.

Notice

Please note the model no., specification and quantity in the order.

In the electric automatic control circuit, it is used to manually send control signals to control contactors, relays, electromagnetic starters, etc. Generally, the main circuit is not directly operated, but can also be used in the interconnection circuit. In actual use, in order to prevent misoperation, buttons are usually marked or painted with different colors, including red, yellow, blue, white, black, green, etc. Generally, red indicates operation under “stop” or “dangerous” conditions; Green means “ON” or “ON”. The emergency stop button must be red mushroom head button.

Main Technical data

Model No.

Normal working condition and installation condition

3.1 Altitude: lower than 2000m.
3.2 Ambient temperature: no higher than +40°C,and no lower than -5°C, and day average temperature shall no more than +35°C.
3.3 Humidity: Relative humidity shall not excced 50% at the Max temperature 40°C, and higher humidity could be accepted at lower temperature. The condensation must be taken care which is caused by temperature change.
3.4 Pollution class: III type
3.5 Installation level: II type
3.6 Install location should have no corrosion gas and onductive dust.
3.7 Pushbutton should be insall at round hole of control plate. The round hole can have square keyway which has upward position. The control plate thickness is 1 to 6 mm. If necessary, gasket could be used.

Appearance and mounting dimensions

gap between mounting hole dimension and many pushbutton install, see diagra.

Notice

Please note the model no., specification and quantity in the order.