High Quality Kinds of Electrical Anti-Vandal DOT Illuminated Push Button

Getting customer satisfaction is our company’s aim for good. We are going to make good endeavours to create new and top-quality solutions, fulfill your specific specifications and provide you with pre-sale, on-sale and after-sale services for High Quality Kinds of Electrical Anti-Vandal DOT Illuminated Push Button, Now we have a skilled team for international trade. We will solve the problem you meet. We can present the goods you want. Be sure to feel cost-free to contact us.
Getting customer satisfaction is our company’s aim for good. We are going to make good endeavours to create new and top-quality solutions, fulfill your specific specifications and provide you with pre-sale, on-sale and after-sale services for China Push Button Switch and Rotary Switch, We insist on the principle of “Credit being primary, Customers being the king and Quality being the best”, we have been looking forward to the mutual cooperation with all friends at home and abroad and we will create a bright future of business.

Product Introduction

RDB5-63 miniature circuit breaker is applicable to a circuit of AC50/60Hz, 230V (single phase), 400V(2,3, 4 phases), for overload and short circuit protection.Rated current up to 63A. It also can be used as a switch for an infrequent conversion line. It is mainly used in domestic installation, as well as in commercial and industrial electrical distribution systems. It conforms with the standard of IEC/EN60898-1.

Features

1. Process guaranteed performance

2. Small volume, large capacity

3. Super-strong wiring capacity

4. Good insulation between phases

5. Super-strong conductivity

6. Low temperature rise and power consumption

Getting customer satisfaction is our company’s aim for good. We are going to make good endeavours to create new and top-quality solutions, fulfill your specific specifications and provide you with pre-sale, on-sale and after-sale services for High Quality Kinds of Electrical Anti-Vandal DOT Illuminated Push Button, Now we have a skilled team for international trade. We will solve the problem you meet. We can present the goods you want. Be sure to feel cost-free to contact us.
High Quality China Push Button Switch and Rotary Switch, We insist on the principle of “Credit being primary, Customers being the king and Quality being the best”, we have been looking forward to the mutual cooperation with all friends at home and abroad and we will create a bright future of business.

In the electric automatic control circuit, it is used to manually send control signals to control contactors, relays, electromagnetic starters, etc. Generally, the main circuit is not directly operated, but can also be used in the interconnection circuit. In actual use, in order to prevent misoperation, buttons are usually marked or painted with different colors, including red, yellow, blue, white, black, green, etc. Generally, red indicates operation under “stop” or “dangerous” conditions; Green means “ON” or “ON”. The emergency stop button must be red mushroom head button.

Main Technical data

Model No.

Normal working condition and installation condition

3.1 Altitude: lower than 2000m.
3.2 Ambient temperature: no higher than +40°C,and no lower than -5°C, and day average temperature shall no more than +35°C.
3.3 Humidity: Relative humidity shall not excced 50% at the Max temperature 40°C, and higher humidity could be accepted at lower temperature. The condensation must be taken care which is caused by temperature change.
3.4 Pollution class: III type
3.5 Installation level: II type
3.6 Install location should have no corrosion gas and onductive dust.
3.7 Pushbutton should be insall at round hole of control plate. The round hole can have square keyway which has upward position. The control plate thickness is 1 to 6 mm. If necessary, gasket could be used.

Appearance and mounting dimensions

gap between mounting hole dimension and many pushbutton install, see diagra.

Notice

Please note the model no., specification and quantity in the order.

In the electric automatic control circuit, it is used to manually send control signals to control contactors, relays, electromagnetic starters, etc. Generally, the main circuit is not directly operated, but can also be used in the interconnection circuit. In actual use, in order to prevent misoperation, buttons are usually marked or painted with different colors, including red, yellow, blue, white, black, green, etc. Generally, red indicates operation under “stop” or “dangerous” conditions; Green means “ON” or “ON”. The emergency stop button must be red mushroom head button.

Main Technical data

Model No.

Normal working condition and installation condition

3.1 Altitude: lower than 2000m.
3.2 Ambient temperature: no higher than +40°C,and no lower than -5°C, and day average temperature shall no more than +35°C.
3.3 Humidity: Relative humidity shall not excced 50% at the Max temperature 40°C, and higher humidity could be accepted at lower temperature. The condensation must be taken care which is caused by temperature change.
3.4 Pollution class: III type
3.5 Installation level: II type
3.6 Install location should have no corrosion gas and onductive dust.
3.7 Pushbutton should be insall at round hole of control plate. The round hole can have square keyway which has upward position. The control plate thickness is 1 to 6 mm. If necessary, gasket could be used.

Appearance and mounting dimensions

gap between mounting hole dimension and many pushbutton install, see diagra.

Notice

Please note the model no., specification and quantity in the order.